Heating Oil Filters Explained

Heating Oil Filters & Oil Tank Filters

At Anglo Nordic, we supply a range of inline filters suitable for heating oil and filters for heating oil replacement filter elements. Available with either stainless steel, plastic or paper filter elements. Our heating oil filters are highly adaptable and suitable for many applications and pipe sizes.

Most of our filters for heating oil are available in either 3/8", 1/2", 3/4" or 1" sizes.

Inline Oil Filters

Our  Cim-Tek inline particulate filters are designed to remove debris from the fuel whist dispensing in larger quantities. These are ideally used when doing a storage tank change or clean to keep you heating oil in the best possible condition.Our bowl filters can be used to remove small particles within the fuel whilst also removing water caused by condensation within the storage tank.

Water Separating Oil Filters

This type of filter is used to monitor and remove any build up in water in the system, known as a water trap filter. Recognised by its use of a  clear plastic filter bowl, in place so that the water can be seen and drained by the drain tap when necessary. Another term used for these types of filter is water separating filter.

Combination Oil Tank Filter

If you buy a new heating oil tank, many will come with a combination filter valve. This type of oil tank filter is a pairing of a filter and an isolation valve. However, a separate shut off valve should still be considered even if  these types of oil tank filter offer an isolating valve as part of the oil storage tank unit.

We also a stock a selection of domestic and generic domestic oil filters. For a full list of heating oil filters, oil tank filters and filter elements please check our oil filters section on our website.

Anglo Nordic have just what you need! If you have any questions for need more information, simply call us on 0208 979 0988 or email us at sales@anglo-nordic.com